- Standards
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
- LED
- 2×Link/Act
- Cable Type
- 10BASE-T: 2-pair UTP/STP (≤250m) of Cat. 3 or above
100BASE-TX: 2-pair UTP/STP (≤100m) of Cat. 5 or above
1000BASE-T: 4-pair UTP/STP (≤100m) of Cat. 5e or above - Ports
- 1×10/100/1000 Mbps Auto-Negotiation RJ45
1×10/100/1000 Mbps Auto-Negotiation RJ45 - PoE Input
- Compliance with 802.3af/at devices
- Max. PoE Output
- 30W
- MAC Address Table
- 2K
- Jumbo Frame
- 9216 bytes
- Dimensions (W×D×H)
- 8.73×1.22×1.24 in (221.7×31×31.5 mm, including waterproofing components)
4.8×1.22×1.24 in (120.8×31×31.5 mm, excluding waterproofing components) - Certification
- CE, FCC, BSMI, KC
- Operating Temperature
- -40°C to 65°C (-40°F to 149°F)
- Storage Temperature
- -40°C to 70°C (-40°F to 158°F)
- Operating Humidity
- 15% to 90% RH non-condensing
- Storage Humidity
- 15% to 90% RH non-condensing
- IP Rating
- IP68
- Lightning Surge Protection
- 6kV
- ESD/EMP Protection
- Air: ±15kV
Contact: ±10kV - Note
- POE20E-Outdoor features an adaptive data rate design. Link stability may be affected by cable length, cable quality, and the characteristics of the connected devices. Under certain conditions, such as using 160–170m Cat5e cables (tested in lab environments), intermittent connectivity may occur. To resolve this issue: (1) Manually configure the connected device to operate at 10 Mbps full-duplex or enable Extend Mode on the PSE, or (2) Adjust the cable length to avoid the affected range.
