TP-Link ER603WP-4G-Outdoor Omada 4G Cat4 N300 Outdoor PoE Gateway

ER603WP-4G-Outdoor

Omada 4G Cat4 N300 Outdoor PoE Gateway

New
RRP TBA

TBA. Please ask for the price of this item.

Datasheet (PDF)

Specifications

Hardware

Standards and Protocols
IEEE 802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3x, IEEE 802.1q, TCP/IP, DHCP, ICMP, NAT, PPPoE, NTP, HTTP, HTTPS, DNS, IPSec, PPTP, L2TP, OpenVPN, WireGuard VPN, GRE VPN, SNMP, LLDP, 802.11b/g/n
Interface
3 Gigabit WAN/LAN Ports
LTE
1 Nano SIM slot (CAT4 4G)
LTE Speed
Downlink: 150 Mbps, Uplink: 50 Mbps
Wi-Fi Speed
2.4 GHz: 300 Mbps
Antennas
2 internal Wi-Fi antennas
2 external LTE antennas
Network Media
10BASE-T: UTP category 3, 4, 5 cable (Max 100 m) EIA/TIA-568 100Ω STP (Max 100 m)
100BASE-TX: UTP category 5, 5e cable (Max 100 m) EIA/TIA-568 100Ω STP (Max 100 m)
1000BASE-T: UTP category 5, 5e, 6 cable (Max 100 m)
PoE
PoE Standard: Passive/802.3af/at/bt PoE in for port 1
Passive/802.3af/at PoE out for port 2-3
PoE Power Budget: 52 W when powered by 802.3bt Type 4 (90 W)
34 W when powered by 802.3bt Type 3 (60 W)
13 W when powered by 802.3at (30 W)
9 W when powered by Passive (the provided PoE adapter)
Network Type
LTE Band of EU:
4G LTE-FDD: B1/B3/B5/B7/B8/B20/B28 (2100/1800/850/2600/900/800/700)
4G LTE-TDD: B38/B40/B41 (2600/2300/2500 MHz)
3G HSPA+/HSDPA/HSUPA/WCDMA: B1/B5/B8 (2100/850/900 MHz)
Button
Reset button
Power Supply
Passive/802.3af/at/bt PoE or 12V/1A Adapter
A passive PoE adapter is provided
Flash
128 MB NAND
DRAM
256MB DDR3
LED
4G Signal, WLAN. WAN/LAN, SYS
Max Power Consumption
10 W without PoE
62 W with PoE
Surge Protection
4 kV surge protection
Mounting
Wall-mounting/ Pole-mounting
Dimensions ( W x D x H )
4.0 × 1.5 × 6.9 in (100.4*38.7*174.8mm)(excluding antennas)
Net Weight
0.420 Kg (including antennas)
MTBF
889200h@25°C
510826h@40°C

SDN Support

Hardware Controller
Automatic Device Discovery
Intelligent Network Monitoring
Abnormal Event Warnings
Unified Configuration
Reboot Schedule
Captive Portal Configuration
ZTP (Zero-Touch Provisioning)*
*Zero-Touch Provisioning is supported only when using Omada Cloud-Based Controller.
Software Controller
Unified Configuration
Reboot Schedule
Captive Portal Configuration
Omada App
ZTP (Zero-Touch Provisioning)*

Performance

Concurrent Session
50,000
New Session/Second
2,028
Static IP NAT Throughput(Upload/Download)
944.785 Mbps/939.201 Mbps
DHCP NAT Throughput(Upload/Download)
944.545 Mbps /927.491 Mbps
PPPoE NAT Throughput(Upload/Download)
939.278 Mbps /928.516 Mbps
L2TP NAT Throughput(Upload/Download)
432.126 Mbps /355.712 Mbps
PPTP NAT Throughput(Upload/Download)
513.104 Mbps /457.323 Mbps
66 Byte Packet forwarding rate (Upload/Download)
1419519 pps /1418731 pps
1518 Byte Packet forwarding rate (Upload/Download)
81068 pps/81068 pps
IPSec VPN Throughput
ESP-SHA1-AES256: 192.432 Mbps
ESP-SHA256-AES256: 195.445 Mbps
ESP-SHA384-AES256: 48.55 Mbps
ESP-SHA512-AES256: 48.363 Mbps
GRE
Unencrypted: 425.292 Mbps
Encrypted: 164.058 Mbps
WireGuard VPN
50.175 Mbps
OpenVPN
11.369 Mbps
L2TP VPN
Unencrypted: 370.822 Mbps
Encrypted: 144.05 Mbps
PPTP VPN
Unencrypted: 408.038 Mbps
Encrypted: 35.912 Mbps

Basic Functions

WAN Connection Type
Static IP
Dynamic IP
PPPoE (supports MRU Configuration)
PPTP
L2TP
DHCP
DHCP Server
DHCPv6 PD Server (only in Standalone Mode)
DHCP Options Customization
DHCP Address Reservation
Multi-IP Interfaces
Multi-Net DHCP
WAN DHCP 60
MAC Clone
Modify WAN Address
IPTV
IGMP v2/v3 Proxy, Custom Mode, Bridge Mode
IPv6
StaticIP / SLAAC / DHCPv6 / PPPoE / 6to4Tunnel / PassThrough / Non-Address mode
Stateful ACL
√
mDNS Repeater
√
Quality of Service
√
Bridge VLAN
√
VLAN
802.1Q VLAN
LAN DNS
√
SMS
Receive/Send SMS

Wireless Function

Wireless Encryption
WPA/WPA2 Personal, WPA/WPA2 Enterprise
Multiple SSIDs
8 in total (8 per radio)
Enable/Disable Wireless Radio
√
Enable/Disable SSID Broadcast
√
Guest Network
√
Automatic Channel Selection Algorithm
√
Transmit Power Control
Adjust transmit Power on dBm
Rate Limit
Based on SSID/Client
Load Balance
√
RADIUS Accounting
√
MAC Authentication
√
Reboot Schedule
√
Wireless Schedule
√
Support Data Rates
802.11n: 6.5 Mbps to 300 Mbps (MCS0-MCS15, HT20/40)
802.11g: 6, 9, 12, 18, 24, 36, 48 ,54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps

Transmission

Load Balance
Intelligent Load Balance
Application Optimized Routing
Link Backup (Timing, Failover)
Online Detection
NAT
One-to-One NAT
Multi-Net NAT
Virtual Server
Port Triggering
NAT-DMZ
FTP/H.323/SIP/IPSec/PPTP ALG
UPnP
Disable NAT
*Port Triggering is supported only in Standalone Mode.
Routing
Static Routing
Policy Routing
RIP
OSPF
*RIP and OSPF are supported only in Standalone Mode.
Session Limit
IP-based Session Limit
Bandwidth Control
IP-based Bandwidth Control

VPN

IPSec VPN
6 IPSec VPN Tunnels
LAN-to-LAN, Client-to-LAN
Main, Aggressive Negotiation Mode
DES, 3DES, AES128, AES192, AES256 Encryption Algorithm
IPSec Failover
IKE v1/v2
MD5, SHA1, SHA-256, SHA2-384, SHA2-256 and SHA2-512 Authentication Algorithm
NAT Traversal (NAT-T)
Dead Peer Detection (DPD)
Perfect Forward Secrecy (PFS)
PPTP VPN
PPTP VPN Server
PPTP VPN Client (6)
6 Tunnels
PPTP with MPPE Encryption
L2TP VPN
L2TP VPN Server
L2TP VPN Client (6)
6 Tunnels
L2TP over IPSec
GRE
√ (Only in Standalone Mode)
SD-WAN
√ (Only in Controller Mode)
WireGuard VPN
√
OpenVPN
OpenVPN Server
OpenVPN Client (3)
18 OpenVPN Tunnels
"Certificate + Account" Mode
Full Mode

Security

Attack Defense
TCP/UDP/ICMP Flood Defense
Block TCP Scan (Stealth FIN/Xmas/Null)
Block Ping from WAN
Filtering
Web Group Filtering
URL Filtering
Web Security
*Web Group Filtering and Web Security are supported only in Standalone Mode.
DNS Proxy
DNSSEC, DoH, DoT, DNS Override
ARP Inspection
Sending GARP Packets
ARP Scanning
IP-MAC Binding
ARP Detection
*ARP Scanning is supported only in Standalone Mode.
Access Control
Source/Destination IP Based ACL
Stateful ACL
IPv4/IPv6 ACL
National Based ACL

Authentication

Web Authentication
No Authentication
Simple Password
Hotspot (Local User / Voucher / SMS / Radius)
External Radius Server
External Portal Server
LDAP
*The following web authentication methods are supported only in Controller Mode: Voucher, SMS, Radius, and External Portal Server.

Management

Service
Dynamic DNS (Dyndns, No-IP, Peanuthull, Comexe, DDNS Customization)
Maintenance
Web Management Interface
Remote Management
Export & Import Configuration
SNMP v1/v2c/v3
Diagnostics (Ping & Traceroute)
NTP Synchronize
Port Mirroring
CLI (only in Standalone Mode)
Syslog Support
*NTP Synchronize is supported only in Standalone Mode.

Others

Certification
CE, RoHS
Package Contents
ER603WP-4G-Outdoor Gateway, Antennas, Mounting Kits, Passive PoE Adapter, Quick Installation Guide
System Requirements
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/8.1/10/11
MAC OS, NetWare, UNIX or Linux
Environment
Operating Temperature: -30 °C to 60 °C
Storage Temperature: -40 °C to 70 °C
Operating Humidity: 5% to 95% non-condensing
Storage Humidity: 5% to 90% non-condensing
*Specifications are subject to change without prior notice.